Required Additional Components; Compatible Realvision™ 3D Products - Raymarine RV-100 Installation Instructions Manual

Item
Description
9 M10 serrated nylock nut
10 Transducer (including fitted 8 m / 26.2 ft cable)

3.3 Required additional components

This product forms part of a system of electronics and requires the following
additional components for full operation.
• For a list of RealVision™ 3D sonar-capable devices, refer to:
RealVision™ 3D products
• For longer cable runs, a transducer extension cable will also be required.
For a list of suitable cables, refer to:
Planning the installation
Compatible
Chapter 10 Spares and accessories
Compatible RealVision™ 3D products
The transducer must be connected to a RealVision™ 3D sonar-capable
device. The following RealVision™ and RealVision™ Max 3D sonar-capable
products are compatible with the transducer.
1. RVX1000 external RealVision™ 3D sonar module (a LightHouse™ 3 or
LightHouse™ 4 compatible MFD is also required).
2. LightHouse™ 3 or LightHouse™ 4 compatible MFD with built in RealVision™
3D sonar module (i.e.: Axiom, Axiom+ or Axiom Pro MFDs).
3. RVM1600 external RealVision™ 3D Max sonar module (a LightHouse™ 4
compatible MFD is also required).
4. LightHouse™ 4 compatible MFD with built in RealVision™ 3D Max sonar
module (i.e.: Axiom 2 Pro RVM MFDs).
15