Table of Contents
Advertisement
Pipette Volume is 0.0 (no liquid in the tips) then the SWITCH button will activate
aspiration. If the Current Pipette Volume is >0.0 (there is liquid in the tips) then the
SWITCH button will activate dispensing.
2. In Automated Program Mode, the function of the SWITCH button can be used to
start a run (same as Run button), and when a program is running the SWITCH
button can be used to Pause the run.
Fig 29 Stop prompt box
7. System Settings
The Settings mode can be selected from the upper left menu. The settings interface
includes three sections: parameter, system and maintenance.
Fig 30 Pause prompt box
25
Advertisement
Table of Contents
