Table of Contents
Advertisement
dispensation
• Deviation Value: Adjust the vertical positioning of the point of aspiration. This
feature does not require input if performing basic aspiration from the selected
Labware List.
• Column Dispense: Toggle to enable column dispensation. Note: this feature
is only available when "Column Load" and "Column Aspirate" are toggled on in
the Load Tips / Aspiration steps (see Figures 18 & 19).
Automated Program Mode: Pause & Rinse Settings:
Pause Step Parameters:
The following settings are available and adjustable for the pause step:
• Pause Time: Toggle to enable a time-based pause step. Time can be
adjusted based on the following format: Hours : Minutes : Seconds (eg.
10:15:20 would correspond to a pause time of 10 hours, 15 minutes, & 20
seconds).
• Prompt Information: Input the set of text to display when the program has
reached the Pause step
Note: Do NOT toggle pause time to the on position if the pause step requires
user confirmation prior to proceeding to the next step(s).
Figure 21 Pause & Rinse Settings
20
Advertisement
Table of Contents
