4. Automated Program Mode
Choose "Automated Program Mode" from the upper left menu to enter the Automated
Program Mode, as shown in the figure below.
Fig 12 Automated Program Mode Interface
The Automated Program Mode offers four function buttons at the top right: New, Save
as, Manage and Records.
Creating a New Program
Press the "New" button to create a new program. The default program name is the
numerical combination of the current date and time (see
Fig 14 Select
),
step
click on this number to change the name if desired, then press OK to start the
programming. Press "New Step" at the lower left and the "Select step" window till open.
Press to highlight the type of step to add to the program, and click OK.
15