Accuris AutoMATE 96 Operation Manual page 26

Rinse Settings:
The following settings are available and adjustable for the rinse step:
• Position: Platform position (P1 – P4)
• Labware List: Select from which plate rinsing will occur (96 deep well plate,
reagent reservoir, etc.)
• Internal Rinse: Toggle to enable internal rinsing of the pipette tips
o Volume (µL): The volume of the reagent used to perform an internal
rinse
o Cycles: The # of internal rinses performed
• External Rinse: Toggle to enable external rinsing of the pipette tips
o Cycles: The # of external rinses performed
• Top (mm): Adjust How far from the top of the Rinse position selected the
AutoMATE 96 will perform internal/external rinsing.
• Bottom (mm): Adjust How far from the bottom of the Rinse position selected
the AutoMATE 96 will perform internal/external rinsing.
Automated Program Mode: Cycle Settings:
Figure 22 Cycle Settings
21