Table of Contents
Advertisement
Manual Mode: Function Keys
As shown in the figure below, there are four Function Keys available : Aspirate,
dispense, Mix and Blow out. The current set volume is shown in the upper left corner
of each Operation button. If the Operation Setting has been set with automatic
aspiration/dispense/mix with a position (mm) set, this set position will also be displayed
in the upper left corner. If there is no position setting, the position data will not be
displayed.
Volume
极 UIhi
Position
value
Fig. 10 Manual Mode: Function Keys
Real Time Information
In the Manual Mode Interface, real-time information of the pipette tips, such as the
volume of liquid in the tips and position of the tips, can be seen. Below
, the
position of the tip can be manually adjusted according to the current position.
Highlight the "Aspirate/Dispense Position" box to enable automatic aspiration /
dispensation to the set descent position. To add descent position, click
of
Aspirate / Dispense Position.
Fig. 11 Manual Mode: Real Time Information
14
Advertisement
Table of Contents
