Related Manuals for Accuris ASPIRE
Summary of Contents for Accuris ASPIRE
- Page 1 ASPIRE Laboratory Aspirator USER MANUAL Rev 5/5/16 Accuris Instruments / Benchmark Scientific Ph: (908) 769-5555 E-mail: info@benchmarkscientific.com (C) Benchmark Scientific, 2016...
-
Page 2: General Warning
The ASPIRE is housed in a heat-resistant, and electrically insulated plastic casing, incorporates a vacuum regulator on the front panel, and also includes a polycarbonate autoclavable bottle and lid with overflow protection valve, silicone tubing, hydrophobic filter, and handheld vacuum pipette. -
Page 3: Technical Specifications
10. Using the device in environmental conditions different than those indicated in this manual may be dangerous to the user and may cause damage to the instrument. TECHNICAL SPECIFICATIONS MODEL ACCURIS ASPIRE LABORATORY ASPIRATOR VOLTAGE 115V,50/60Hz or 230V, 50/60Hz POWER CONSUMPTION... - Page 4 Guidance and manufacturer’s declaration – Electromagnetic Emissions The ACCURIS ASPIRE LABORATORY ASPIRATOR is intended for use in the electromagnetic environment specified below. The customers or the user of the ACCURIS ASPIRE LABORATORY ASPIRATOR should assure that it’s used in such an environment. Emissions Test...
-
Page 5: Accessories Supplied
IEC/EN 61000-4-8 should be measured in the intended installation location to assure that it’s sufficiently low. Conducted Immunity 3Vrms 150kHz to 80MHz IEC/EN 61000-4-6 (for appliances that aren’t life - supporting) Irradiated Conducted 3V/m 80MHz to 2.5 GHz IEC/EN 61000-4-3 (for appliances that aren’t life - equipment) Note U... -
Page 6: Maintenance
DO NOT WASH, STERILIZE OR AUTOCLAVE THE ANTIBACTERIAL FILTER MAINTENANCE The ACCURIS ASPIRE LABORATORY ASPIRATOR does not require any routine maintenance or lubrication. It is, however, necessary to inspect the unit before each use. Unpack the instrument and always check the plastic parts for any damage that may have occurred during prior use. - Page 7 SERVICE. THE MANUFACTURER CANNOT HONOR THE WARRANTEE IF THERE HAS BEEN AN UNAUTHORIZED ATTEMPT AT REPAIRING THE INTERNAL COMPONENTS. OPERATING INSTRUCTIONS Place the Aspire Aspirator on a flat, horizontal surface Connect the end of the short silicon tube, with antibacterial filter, to the suction connector. ...
- Page 8 INSTALLED REQUIREMENTS FOR RETURNING AND REPAIRING Accuris Brand Products carry a 24 month warranty from the date of purchase, covering manufacturing defects. In the event of a service related issue, contact Benchmark Scientific’s Service Department at 908-769-5555. In the event that the Aspirator unit needs to be returned to Benchmark for repair, contact Benchmark Scientific for a Return Authorization number.
Need help?
Do you have a question about the ASPIRE and is the answer not in the manual?
Questions and answers