Table of Contents
Advertisement
Fig 28 Run Interface
Stop / Pause a Run in Progress
During a protocol run, the user can Stop the process by clicking the Stop button. A
window will appear to confirm the stopping of the run (as shown in Figure 40) and
clicking OK will stop the current protocol. The pipetting head and motorized platform
will return to the home position. To Pause a run, the user can press the Pause button.
The run can then be resumed by pressing Continue or stopped by pressing Stop.
Additionally, users may also be able to view the progress of the run from this screen.
Fig 61 SWITCH button
The SWITCH button is located on the base of the instrument and has the following
functions:
1. In Manual Mode, the switch button is used to Aspirate and Dispense. If the current
24
Advertisement
Table of Contents
