Table of Contents
Advertisement
Fig 13 New protocol
Fig 14 Select step
The "Step Parameters" for the newly added step can now be set. Select a Position for
the step (P1 to P4). Typically, "Load Tips" would be the first step, and for this the tips
are usually positioned the at P1 (far left) position of the platform. Select the platform
position P1.
Figure 16 Step Parameters
Next, press the "Labware list" button to choose the appropriate tips to load, ( Fig );
Or, if pipetting with only a column of 8 tips, for a process such as serial dilution, choose
"Load by column". Choose the column of tips (1 to 12) which is to be loaded on the left
most column of the pipetting head. See figure x. Unloading tips carry the same
parameters as loading tips, but for tip ejection.
16
Advertisement
Table of Contents
