Establishing Communication In 'Push-To-Talk' Mode; Adjustments On Screen Display - golmar ART 5W/GTWIN User Manual

ART 5W/GTWIN MONITOR
MONITOR DESCRIPTION
Establishing communication in 'Push-to-talk' mode by pressing button
To select this operating mode, see page
When receiving a call, press buton
colour); if button
caller. To listen on the monitor, release button
To end the conversation, press button

Adjustments on screen display

With the monitor in auto switch-on, call or communication: allows to enter/exit the "adjustments on screen display"
(brightness, contrast, colour and communication volume). A short press on the
" adjustments on screen display
communication volume options, this last option only with the monitor in communication with the
the / buttons to scroll down or up respectively through the menu options and press the
adjustments.
Door panel call screen
Adjust the selected
option.
13 to activate the "Push to talk" mode.
to stablish communication, the notification icon of the monitor will blink (green
is pressed and held down the audio channel to the panel is activated and you can talk to the
.
:
", an OSD menu will appear showing the brightness, contrast, colour and
To enter & exit from
adjustments on screen
display.
Up / downbajar through
the menu options.
.
Door panel communication screen
:
button to enter/ exit the
door panel
/ buttons to make
To enter & exit from
adjustments on screen
display.
Up down / bajar
Adjust the selected
the menu options
option .
6
. Press
through
.