golmar ART 5W/GTWIN User Manual page 21

ART 5W/GTWIN MONITOR
Continued from previous page.
SETTINGS MENU
Associate the Golmar Gcall App with the apartment's master monitor:
Select the option
into configuration mode and the following screen will be displayed.
Configure "Call Forwarding" screen
State: State:
Ringtone volume
Video quality: Video quality:
1
SIP name: SIP name:
DHCP: DHCP:
Speaker volume
Device IP: Device IP:
Gateway IP: Gateway IP:
1
Network mask: Network mask:
DNS: DNS:
Call melody
SSID: SSID:
1
WIFi o ffstart time: WIFi o ffstart time:
WiFi o ffend time: WiFi o ffend time:
To configure the call forwarding function, see "
complete, press the button
indicate that the call forwarding function is active on the monitor. When the function
the panel in the apartment
and configured.
Main menu
8H
using the buttons /
Off Off
Low Low
2 3
mySipName mySipName
On On
192.168.1.101 192.168.1.101
192.168.1.254 192.168.1.254
2 3 4 5
255.255.255.0 255.255.255.0
8.8.8.8 8.8.8.8
ON
myLAN myLAN
2 3 4 5
01:00 01:00
07:00 07:00
1/2
Golmar call
to return to the main menu screen. The following icon
, it will be received by the monitor(s) and smartphones on which the Golmar Gcall App is installed
ON
and press the button
Configuration mode screen
MAC address:
UID:
SSID:
G " manual & "Golmar Gcall Configurator".
8H
Status icon of the call forwarding function:
Function not activated
Function activated
II
No connection to WiFi
!
Feature configuration in
x
Configuration error
to enter. After a few seconds the monitor will go
To bind your GCall to this device,
scan the QR code from the application
AA:BB:CC:DD:EE:FF
1234567890ABCDF
Once the configuration is
will be displayed in the main menu to
is active and a call is received from
ON
Main menu
ON ON
Golmar G Ca l application incomplete. l
21
CALLFW
Continued overleaf