Table of Contents
Advertisement
ART /G2+ MONITOR
4
COMMUNICATION SCREEN
This screen is displayed during a communication process. During a
screen
is in red color.
the image is displayed. The c
Press the button below icon
required). Note: Displayed on the screen during a call or communication process if the
function to change the source of the image is not activated by displaying the icon
screen instead.
Press the button below icon
volume settings menu. Select the option to be modified by pressing the buttons below
corresponding icons
corresponding icons
(see pp. 14 to 16).
Press the button below icon
than one door panel or has an external camera connected and display has been activated (see
pp.
Press the hidden button below icon
output of the door panel) for 3 seconds (factory setting, see pp. 28 to 31).
1
P
ress the hidden button below icon
output of the door panel) for 3 seconds (factory setting, see pp. 28 to 31).
2
A few seconds after receiving a call, it automatically takes a photograph. In the top left of the screen,
icon
If a Micro SD card is inserted, a 15-second video automatically starts recording a few seconds after
receiving the call. In the top left of the screen, icon
recording mode). Then a short 1-second press on the button below icon
or a long -second press will record a video.
Note: New menu available with V.07 of ART 4 G2+ monitor.
1
In the top centre of the screen, the date and time are shown and, on the
ommunication
/
/
28 to 31
). It is possible to make the change during display, call and communication processes.
Press the button below icon
displayed respectively. Communication has a maximum duration of 90 seconds. Once
communication has ended, the screen will turn off.
is displayed. Press the button below icon
3
28-04-2022 18:25
2
1
has a duration of
90
seconds.
to "
staircase light activation (SAR-G2
"
for 3 seconds to access the image and monitor in communication
2
, change to the desired level by pressing the buttons below
and validate the changes made by pressing the button below icon
to change the source of the image as long as the system has more
/
to start or end audio communication with the door panel
to activate the lock release (or device connected to the relay 1
1
to activate the lock release (or device connected to the
2
1
communication
, icon
+ &
SAR-12/24 modules
to take a picture.
is displayed (see p.
10
will take a photograph
13
displayed on the
left
, the source of
on the
,
relay 2
to configure video
Advertisement
Table of Contents
