Installing The Monitor In An Embedding Box - golmar ART 5W/GTWIN User Manual

ART 5W/GTWIN MONITOR

INSTALLING THE MONITOR IN AN EMBEDDING BOX

Avoid dusty or smoky environments or locations near sources of heat.
Location of the embedding box:
Make a hole in the wall to position the top of the universal embedding box at a height of 1.60 m from the ground. The
minimum distance between the sides of the embedding box and the closest object must be 5cm.
Positioning the embedding box and fitting the wall mounting connector:
Pass the cable through the hole made in the embedding box. Embed the box and ensure that it is level and flush.
Fix the wall mounting connector of the monitor to the embedding box with the screws supplied.
Positioning the monitor:
Connect the cables to the monitor (see p. 4), position the monitor in front of the wall mounting connector, ensuring that
the holes in the base of the monitor line up with those on the connector
until the monitor is securely fixed to the connector
2
Remember to remove the protective covering from the front of the monitor once installation is complete.
1
1.60m
.
3
2
Screws supplied with
the embedding box.
, and then move the monitor downwards
1
11
3