Settings And Operation Of The Guard Monitor - golmar G2+ 4 User Manual

ART /G2+ MONITOR 4

SETTINGS AND OPERATION OF THE GUARD MONITOR

Settings "guard monitor" mode:
The monitor/s to be configured as a guard monitor/s (up to 4 monitors) in the building, must be
configured with
' 5001
be now a guard monitor/s with
main menu screen.
module with the
Operation of the "guard monitor":
-The master and slave monitor(s) receive the call from the access door panel (by pressing button P1
on the sound module).
-The master and slave guard monitor(s) can be autoswitch-on with the access door panel.
- Master
on the main menu of the apartment monitor).
-The master and slave guard monitor(s) can be used to call the apartmets (intercom menu).
-It allows internal intercommunication between the guard monitors.
In the main menu monitor/s of the apartments, the icon
Press the button below the icon
address 1 and as
' in a master monitor (see special codes on pages 28 to 30), the monitor/s with address 1 will
Note:
The access door panel will auto-configure the
call address 129
& slaves monitors receive calls from the apartments (by pressing the button below icon
Guard monitor main menu screen
Main menu monitor/s of the apartment
master slave 1 slave 2 , ,
address 129 and displaying the symbol
.
28-04-2022
09:27
PM
of call to guard monitor will be displayed.
to make a call to the guard monitor(s).
or slave 3 . Then enter the special code
at the top right of the
button P1
27
on the sound