Operation
Priority Channel Watch During Group Scan
The feature allows user to monitor the Instant Priority channel (see page 19)
every 1.5 secs during Group Scanning.
Press (menu) four times. PRI setting
1.
flashes.
2.
Press (ch)
3.
Press & hold (menu) to save and exit.
Programming Scan Channels
1.
Select which Scanning Mode you wish to use on the channel OS or GS Mode.
OS is indicated by the absence of the GS icon.
NOTE
2.
Select the channel you want to store by pressing (ch)
3.
Press and hold (scan/mem) to store.
M icon appears.
To remove the channel from Memory, Press and hold (scan/mem) to
4.
remove. M icon disappears.
Drop-Out Delay
While scanning, the radio stops at a busy channel and receives a signal. When
the received signal is over, the unit will wait for 2 seconds for the return of the
signal, otherwise, the radio resumes scanning.
UNIDEN UH820SX-NB/UH820SX-2NB
or
or (vol)
or
to change the setting on or off.
18
or
.
UHF CB Radio