Table of Contents
Advertisement
© Receiving a geographical area call
While monitoring channel 70 and a geographical area call (for
the area you are in) is received:
'» Emergency
alarm or beeps
sound depending on the re-
ceived category.
'= "RCV" and "GEOGRAPHIC"
appear in the display; then, the
Rev
mW
vse ALE
eaanan
GEOGRAPHIC
channel specified by the call-
wm
ing station is automatically se-
wa US
lected
for
voice
GEOGRAPHIC
communications.
'* Monitor the selected channel for an announcement from
the calling ship.
NOTE: When no GPS receiver is connected or if there is a
problem with the connected receiver, all geographical area
Z calls are received, regardless of your position.
SSS
DIGITAL SELECTIVE CALLING
4
© Receiving an individual call
When receiving an individual call, an acknowledgement must be
sent back to the calling station within 4.5 min. Operation and
transceiver function differs depending on the SET mode settings.
Two messages can be selected for acknowledgement:
* "Able to comply".
...You can communicate with the
calling vessel via the mic after a DSC connection.
* "Unable to comp!
You cannot communicate with
the calling vessel after a DSC connection (e.g. operator
leaves transceiver).
While monitoring channel 70 and an individual call is
received:
'» Emergency alarm or beeps sound depending on the re-
ceived category.
"> "RCV" and "INDIVIDUAL" ap-
pear in the display.
'» The channel specified by the
calling station is automatically
selected
for checking
the
channel
condition
(except
when full automatic acknowl-
edgement is selected).
'> Proceed as follows on the next
Page according to your preset conditions.
eee
'TDUAL,
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-M127 and is the answer not in the manual?
Questions and answers