Table of Contents
Advertisement
Operation
Vapour extraction
Setting the power level
Power levels 1 to 3 and a Booster level
are set as standard. The power levels
can be extended to 1 to 9 and a
Booster level (see "Adjusting settings").
If the vapour extraction is not switched
off manually, it will switch itself off auto-
matically 12 hours after last being used.
If the cooker hood starts at power
level 1, the power is automatically in-
creased to level 2 for 20 seconds.
The increase in power is necessary in
order to ensure that the flap opens in
extraction mode. If you are using the
cooker hood in recirculation mode,
you can deactivate this automatic
function (see "Adjusting settings").
Touch the vapour extraction display.
Touch the appropriate sensor control
for the power level you want.
Switching off the vapour extraction
Touch the vapour extraction display.
Touch the 0 sensor control.
48
Activating the Booster
The Booster function is active for a
maximum of 10 minutes.
Touch the vapour extraction display.
Touch the B sensor control.
Deactivating the Booster
Touch the vapour extraction display.
Set another power level.
Deactivating Con@ctivity temporarily
If you want to deactivate Con@ctivity
permanently, you will need to change
the Con@ctivity programming (see "Ad-
justing settings"). If Con@ctivity is per-
manently deactivated, the sensor
control will no longer be visible.
You can deactivate Con@ctivity in
various ways:
- Touch the sensor control
- Touch the 0 sensor control
- Select a different power level
Set the power level you want.
Depending on the programming,
Con@ctivity will be reactivated when
you switch the hob off and back on
again (see "Adjusting settings").
Advertisement
Table of Contents
