Operating Principles - Miele KMDA 7676 Operating And Installation Instructions

Operating principles

Hob when switched off
Only the printed symbol for the On/
Off  sensor control is visible when the
hob is switched off. More sensor con-
trols light up when the hob is switched
on.
Operation
a Sensor controls and indicators
This ceramic glass hob is equipped with
sensor controls which react to finger
contact.
Each time a sensor control is activated,
an audible signal sounds.
For safety reasons, in order to switch
the appliance on, the On/Off  sensor
control needs to be touched for a little
longer than the other sensors.
Selecting a cooking zone
If you want to configure settings for a
cooking zone, the cooking zone must
be selected first.
To select a cooking zone, touch the rel-
evant cooking zone indicator. The relev-
ant cooking zone indicator will appear
brighter when touched.
When the cooking zone indicator ap-
pears brighter, the cooking zone is se-
lected and you can configure settings
for the cooking zone.
Exception: if only one of the cooking
zones is in operation, you can configure
settings without selecting the cooking
zone.
Familiarisation
27