Table of Contents
Advertisement
GENERAL INFORMATION
24
If there is a fault with the smart key or
the smart key battery is flat then take
the smart key to the nearest Triumph
dealer to rectify.
For security reasons, the smart key
should be switched off every time it is
removed from the motorcycle.
Smart Key Battery Replacement
There is a risk of explosion if an
incorrect battery is used.
Always make sure that the correct
battery size and type is used.
Batteries contain harmful materials.
Always keep batteries out of the
reach of infants and young children to
prevent them being swallowed.
If
swallowed,
immediately.
Do not touch the contact sides of the
battery with your skin. Only touch the
edges of the battery when you hold it.
The natural materials in your skin can
cause corrosion and shorten the life of
the battery.
Warning
Warning
consult
a
doctor
Caution
To replace the smart key battery:
Make sure that the smart key is in
▼
passive mode (red LED).
Remove the battery cover fastener
▼
using a 0.06 in (1.5 mm) AF Allen key.
Remove the battery cover.
▼
Remove the battery, noting its
▼
orientation.
Insert a new 3 Volt CR2032 Lithium
▼
battery.
Replace the battery cover making
▼
sure that it aligns correctly.
Reinstall the battery cover fastener
▼
and tighten to 2.7 lbf in (0.3 Nm).
Battery Disposal
The used battery must be handed to a
recycling agent who will make sure that
the dangerous substances from which
the battery is manufactured do not
pollute the environment.
Advertisement
Chapters
Table of Contents
