Triumph Speed Triple 1200 RR 2022 Owner's Handbook Manual page 155

Warning
Make sure the battery busbar, positive
and negative terminals do not come
into contact with each other.
Do not reverse the positive (+) or
negative (-) terminals.
Shorting the positive and negative
terminals, may cause the battery to
vent gas at a very high temperature.
Venting high temperature gas will
cause irreparable
motorcycle and or serious personal
injury or death.
To install the battery:
Install the battery into the battery
▼
case.
Reinstall the battery strap.
▼
B01221_3
1. Battery strap
2. Hook
Reconnect the
▼
(red) lead. Tighten the terminal to
39.8 lbf in (4.5 Nm).
damage to the
1
2
battery, positive
MAINTENANCE
Apply a light coat of grease to the
▼
terminal to prevent corrosion.
2
B01222_2
1. Battery positive lead cover clip
2. Battery positive lead busbar cover cap
Cover the positive terminal with the
▼
busbar cover cap.
B01221
1. Battery positive lead busbar cover cap
2. Battery positive lead cover clip
155
2
1
1
1
2