Table of Contents
Advertisement
Smart Key Battery Replacement
Warning
There is a risk of explosion if an
incorrect battery is used.
Always make sure that the correct
battery size and type is used.
Warning
Batteries contain harmful materials.
Always keep batteries out of the
reach of infants and young children to
prevent them being swallowed.
If
swallowed,
consult
immediately.
Caution
Do not touch the contact sides of the
battery with your skin. Only touch the
edges of the battery when you hold it.
The natural materials in your skin can
cause corrosion and shorten the life of
the battery.
To replace the smart key battery:
Make sure that the smart key is in
▼
passive mode (red LED).
Remove the battery cover fixing
▼
using a 1.5 mm AF Allen key.
Remove the battery cover.
▼
Remove the battery, noting its
▼
orientation.
Insert a new 3 Volt CR2032 Lithium
▼
battery.
Replace the battery cover making
▼
sure that it aligns correctly.
GENERAL INFORMATION
▼
Battery Disposal
The used battery must be handed to a
recycling agent who will make sure that
the dangerous substances from which
the battery is manufactured do not
pollute the environment.
Keyless Ignition
The keyless ignition system allows the
motorcycle to be started without the
use of a mechanical key.
Smart Key Operation
To turn the motorcycle on with the
a
doctor
keyless ignition:
▼
1.
2.
Refit the battery cover fixing and
tighten to 0.3 Nm.
The smart key must be within close
proximity (one metre/three feet) of
a system sensor. There is a system
sensor located on the right hand
side of the motorcycle, and another
system sensor located at the front
of the motorcycle. If the smart key
is out of range of a system sensor
then it will be unresponsive and the
keyless ignition cannot be activated.
Status symbol light
ON/OFF button
25
1
2
Advertisement
Chapters
Table of Contents
