Advertisement
High noise level.
Tape itself has high noise ievel.
®@ Repiace cassette tape.
Connecting cord has been connected improperly.
| @
Inspect input and output connections; connect
=
cords properly {see page 8).
@
Unit has been placed near TV set.
@
Move the deck away fram the TV set or turn the
;
TV power off.
@
Recording levei is too low.
@ Turn up recording level and record {see page
|
49}.
@
Dirty heads.
| @ Clean heads {see page 7).
@
Heads are magnetized.
°
Demagnetize them with head eraser.
|
Recording or palyback
@
TIMER mode selector is set to the PLAY- REPEAT
@ Set TIMER mode selector to OFF.
starts suddenly when
or REC pasition.
> turning power on,
|
Cannot use the remote
@ The controi cord is not connected.
° Connect control cord properly (see page 8).
i
control | system.
"cD: DECK SYNCHRO
fe
cD: DECK SYNCHRO control cord a and input/
® Connect correctly (see page 8}.
recording cannot be
j
Output cords are not connected.
carried out.
| @
The cassette tape accidental erasure prevention
@
Replace the cassette with one whose tabs are
{
tabs are broken.
|
intact {see pages 5 and 6).
@ The tape ran out while in the CD - DECK
| @ Replace the tape with a longer one.
| | The cD SYNC indicator is
| off during CD - DECK
| SYNCHRO recording.
SYNCHRO mode.
@
After the deck "entered recording standby made,
more than 1 minute elapsed before the CD player
resumed playback.
Change 'the 'disc and press "the cD SYNCHRO
button again.
a
<RREIWO77>
En
Advertisement
