Advertisement
| TROUBLESHOOTING
Symptom
Cause
| Cassette door does not
| open.
Cassette door does not
| close.
| @
Tape mechanism was not stopped.
©
Cassette tape has not been loaded properly.
| No power when POWER
switch is set to ON.
@
Disconnected power cord.
@
Power cord is connected to switched auxiliary
outlet on a stereo component which is turned
STANDBY.
®@ Press the stop (Ml) button.
@
Load the tape again.
*# Connect property to a power outlet.
®
Turn on the power of that component.
when recording anew,
A tape which was not recorded with the Dolby
ae ce arp
Ra Oman |
@
Set DOLBY NR to OFF.
26
<RRE1O77>
En
Low treble sound.
e
:
NR System is being played back with DOLBY NR_
|
ON.
|
® Dirty heads.
®@ Clean heads (see page 7).
|
Boosted treble.
©
A tape which was recorded with the Dolby NR
je
Set DOLBY NR to B or C.
Systems is being played back with DOLBY NR
H
OFF.
'
Distarted sound.
| ©
Distortion in recorded tape itself.
®
Try a different tape.
@
Recording level is too high.
| ©
Turn down recording level and record again (see
|
page 19).
|
| @ Dirty heads.
» @ Clean heads (see page 7}.
(2
ooavee
a
Se
&
ine
SAR
oe.
i
Unstable or intermittent
©
Dirty heads, pinch rotler and capstan.
| @
Clean (see page 7).
sound.
®
Cassette tape is not wound up uniformly.
®@ Fast forward or rewind tape to wind up tape
again.
Advertisement
