Pantum M7300 Series User Manual page 96

5) Click on "Adjust the Scanned Image Quality" on the bottom left corner of the above picture,
the advanced properties interface will pop up, then users can set the scan; After finishin the
settings, click on the "OK" button, then "Scan" button to start scan.
2. Photoshop
Operation Steps:
1) Launch Photoshop, click "File"- "Import" on the top left conrner and select WIA Scan, as is
shown below:
2) After the window pops up, please refer to Step 4 and Step 5 of 9.1.1.3.1 to see the specifi
operation steps.
68