Fax; Connect Devices; Fax Settings - Pantum M7300 Series User Manual

10. Fax

10.1. Connect Devices

• " " port is used to connect fax with telephone line.
• " "port is used to connect external telephone
• It is recommended to use the traditional analog phone service (PSTN: Public
Note:
Switched Telephone Network) in connecting telephone line. If a digital environment
(for examples, DSL, PBX, ISDN or VoIP) used, please be sure to use a proper filter
and configure digital settings correctly. For more information, please contact your
digital service provider.

10.2.Fax Settings

Fax setting interface includes the following functional setting:
No. Options
Resolution
1
Original Size
2
3 Luminosity
4 Fax Name
5 Fax Number
Group
6
Sending
Delay
7
Sending
Forward the
8
Received
Send
9
Settings
Receive
10
Settings
Description
You may select the faxing definition from options of "Standard, Fine,
Super Fine and Image". It defaults to "Standard".
You can select the desired size of the document to be Faxed. The
available options are A4, Letter and Legal.
You can adjust the luminosity of Fax documents manually or
automatically.
Input the fax name and save it.
Input the fax number and save it.
With the feature of multi-address sending, it supports inputting
several numbers to be faxed one by one, with the ability of up to 20
fax numbers sent to at the same time.
With the feature of delay in sending, you may set the fax number
and delay time of sending (within 24 hours), making the fax sent
upon the time set. 30 fax jobs at most supported now.
After enabling "Forward to Fax", please set the number to be
forwarded; upon receiving the fax, it will forward to the number
set immediately; if enabling "Forward and Print" at the same time,
the printer will automatically print a copy of fax job for saving after
receiving the fax.
You can use the options in Send Settings to set the parameters for
sending Fax.
You can use the options in Receive Settings to set the parameters
for receiving Fax.
77