Wi-Fi Protected Setup (Wps) Setup; How To Disable The Wi-Fi Network Connected; Wi-Fi Direct Mode; Preliminary Preparations - Pantum M7300 Series User Manual

Operate as per real interface. (Please refer to
Note: • If the printer cannot be used normally after wireless network setup is finished,
please install the drive again. Please select "wireless network connection " as the
installation method .

5.1.2.Wi-Fi Protected Setup (WPS) setup

If access point (wireless router) supports Wi-Fi Protected Setup (WPS), connect printer with
wireless network through "Push button configuration (PBC)" and "Personal identificati
number (PIN)".

5.1.2.1.Preliminary preparations

1. The access point (wireless router) supports Wi-Fi Protected Setup (WPS).
2. A printer that has wireless network function.
5.1.2.2. Use the "Button Configuration (PBC)" method
1. Turn on the power of printer and access point (wireless router).
2. . Make sure the printer is in ready stat
3. From printer control panel navigate to: " 3. . From printer control panel navigate to:
4. . Operate according to the prompt in printer scree
5.1.2.3. Use the "Personal Identification Number (PIN)" method
1. Turn on the power of printer and access point (wireless router).
2. . Make sure the printer is in ready stat
3. . From printer control panel navigate to: 3. From printer control panel navigate to: "
4. . Record 8-digit WPS PIN cod
5. . Open Web browser, enter IP Add. of access point (wireless router) in Add. field.
6. Access to WPS setting, enter 8-digit PIN code and save.

5.1.3.How to disable the Wi-Fi network connected

1. From printer control panel navigate to: " 1. . From printer control panel navigate to:
2.Select "Close" button and save.

5.2.Wi-Fi Direct mode

You can connect wireless client (including the computer and mobile device with wireless
network feature) to wireless network printer without using the access point (wireless router).
5.2.1.Preliminary preparations
1. . Printer with the Wi-Fi Direct featur
2.2.Wireless client (including computer and mobile device with wireless network feature).
Chapter 5.1.2 for detailed WPS configuration.)
" -Network set-Wireless conf.-PBC mode.
" -Network set-Wireless conf.-PIN mode.
" -Network set-Wireless conf.-Station.
35