How To Disable The Wi-Fi Direct; Wireless Network Setup Faqs - Pantum M7300 Series User Manual

4. . Select printer SSID on direct interface to launch a connection invitation.
5.When the panel inquires if connect or not, click "OK" button for confirmation and Wi-Fi Direct
• In case of auto connection mode, the mobile device will start to connect
Note:
automatically after initiating connection invitation without panel confirmation.
5.2.2.2.Connection method of wireless client that does not support Wi-Fi Direct
function (input password to connect)
1. Turn on printer power.
2.From printer control panel navigate to: "
name" and "Password".
3. Turn on the computer or mobile device with wireless network function; select the SSID of
Wi-Fi Direct and input password to connect.
• Initial password of printer for Wi-Fi Direct: 12345678.
Note:

5.2.3.How to disable the Wi-Fi Direct

1.From printer control panel navigate 1. 1.From printer control panel navigate to:
2.Select "Turn off" button and save.

5.3.Wireless network setup FAQs

1. . The printer is not found
• If the power of compute , access point (wireless router) or printer is turned on.
• If the computer is connected to printer with USB cable.
• If the printer supports wireless network connection.
2. . SSID cannot be found when network is connected
• Inspect if the power switch of access point (wireless router) is turned on.
• The printer cannot find the SSID of the access point (wireless router) you need to connect
please check the SSID of access point and try to connect again.
• Every time when the setup of access point (wireless router) is changed, you must set up the
wireless network of printer again.
3. . Connection failure
• Please inspect if the safe mode and password of access point (wireless router) and printe
is correct.
• Inspect the wireless receiving around printe . Signal receiving may be affected if the router
is away from the printer or there is an obstacle between them.
• Turn the power of access point (wireless router) and printer off and then restart them and
set up.
"-Network info-WiFi dir. info to check "Network
" "-Network settings-Wi-Fi dir.
.
37