Pantum M7300 Series User Manual page 61

• The SSID you selected should be consistent with the SSID of access point
Note:
(wireless router) connected to your computer.
2) Please tick "No" to configure other wireless network needed to connect to. Complet
configuration according to interface prompt.
• At present, the printer supports 3 types of safe modes: none, WEP and WPA/
Note:
WPA2.
1) None: There is no encryption method used.
2) WEP: Send and receive data via security key by using WEP (Wired Equivalent
Privacy). WEP key is applicable to 64-digit and 128-digit encrypted network and
can contain numbers and letters at the same time.
3) WPA/WPA2: it is the pre-shared key (PSK) of Wi-Fi protected access which
connects wireless device and access point via TKIP or AES encryption (WPS-
Personal). The working length of WPA/WPA2 is within the PSK of 8-63 characters.
• The display password is not ticked by default; if it is ticked, all passwords input
can be seen in clear text.
33