Pantum M7300 Series User Manual page 50

8. 8. Select "Yes, I want to configurate the printer's wireless network" on the wireless setup
window popped out, and operate according to the prompts to set up the printer to wireless
network (please refer to
9. The installation software will search the printer automatically after wireless network is
configured successfully. The search process may need some time.
10. Select the printer needs to be connected and click "Next".
Note: • If the printer you need to connect is not in the list of printers searched, please
click "Refresh" to search again.
• When the printer IP address changes under printer driver installed with host ID ,
you can also directly print without re-installing the driver. If you need to install the
printer driver with the host ID, please check the option "Install the printer in the list
with host ID".
• If IP address or host name is added manually, you need to know the IP address
of the printer connected or host name. If they are not made clear, please print the
"NetConf Pg" and view "IP Address" and "Host name" (Please refer to
12.4).
Chapter 5.1.1 for setup method).
Chapter