Table of Contents
Advertisement
Media Setting Optimization
Optimize the media settings when you have registered media settings or when you have changed any
Advanced settings for saved media settings. This helps correct any individual differences between the
media and the printer settings.
Be sure to run both a Paper Feed Adjust and a Print Head Alignment.
Before you make adjustments, note the following:
• Adjustment varies depending on the loaded media. Make adjustments using the media on which you
want to print and select the paper type that matches the paper in the printer. When adjusting using
non-Epson paper, make sure you register the custom paper in advance.
• When you add a paper setting value, be sure to select the name set in Custom Paper Setting from
the printer's menu as the Paper Type.
• Run a nozzle check before you align the print head. If there are any gaps in the nozzle check pattern,
clean the print head.
• Load paper that is at least A4 (8.3 × 11.7 inches [210 × 297 mm]) size or larger.
Adjusting the Paper Feed Using the Product Control Panel
Aligning the Print Head Using the Product Control Panel
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Loading Cut Sheets in the Rear Manual Feeder
Loading Media in the Front Manual Feeder
Loading Cut Sheets in the Paper Cassette
Loading Roll Paper
Adjusting the Paper Feed Using the Product Control Panel
If your printouts are grainy or blurry, or you still see dark or light horizontal bands, you may need to
adjust the paper feed using the product control panel.
1. Load the roll paper or cut sheet paper that you want to print on in the printer.
Note: Load paper that is A4-size or larger.
Print Head Maintenance
183
Advertisement
Table of Contents
