Table of Contents
Advertisement
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
1. Make sure roll paper or cut sheet paper A4-size or larger is loaded in the printer.
2. Make sure the correct paper type is selected.
3. Select
4. Make sure the displayed paper source matches the paper source for the paper you loaded and then
select Start.
The nozzle check pattern prints.
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6. Do one of the following:
• If there are no gaps, select O to exit.
• If there are gaps or the pattern is faint, select X to perform head cleaning.
7. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Cleaning takes about 5 to 6 minutes.
Parent topic:
Related tasks
Loading Cut Sheets in the Rear Manual Feeder
Loading Media in the Front Manual Feeder
maintenance > Print Head Nozzle Check.
Print Head Nozzle Check
173
Advertisement
Table of Contents
