Epson SureColor P5370 User Manual page 138

Setting
Advanced Paper Settings
Remaining Amount
Management
Change Paper Type or
Change Paper Type/Paper
Width
Advanced Paper Settings menu (in the Roll Paper menu)
Setting
Paper Thickness
Platen Gap
Options Description
Various options See the Advanced Paper Settings table
below.
Remaining Amount Select On to display and record the amount of
Management remaining roll paper.
Remaining Amount Select the amount of roll paper remaining.
Remaining Alert Select the amount of remaining roll paper
before a warning is displayed.
Paper Type Select a paper category and paper type.
Paper Width Change the paper width by setting Paper Size
Check to Off.
Select the width of the loaded paper, or select
User-Defined if the width is not listed.
Options Description
0.01 to 1.50 mm or Select the thickness of the roll paper;
displayed only when using a custom paper
0.4 to 59.1 mil
type.
Note: Load paper that is 0.003 to 0.02 inch
(0.08 to 0.50 mm) thick and set the paper
thickness accordingly.
Auto Select the distance between the print head
and the paper; displayed only when using a
0.9
custom paper type.
1.2
1.5
2.1
2.6
138