Table of Contents
Advertisement
Setting
Paper Thickness
Platen Gap
Margins
Paper Suction
Roll Tension
Drying Time
Paper Size Check
Auto Cut
Skew Reduction
Roll Core Diameter
Description
Set the thickness of the paper
Set the distance between the print head and the
paper; choose a wider setting if prints are
frequently scratched or smudged
Select the margin for the leading edge of the
printed image. Depending on the paper type and
printing environment, colors may be uneven near
the leading edge if the margin is small.
Select to adjust the printer's suction setting;
choose lower values for thinner papers
Adjust the roll tension setting if paper gets wrinkled
during printing
Set the drying time for each print head pass or for
each page
Select On to automatically detect the paper width
when paper is loaded.
Select Off when the paper roll is empty. This
allows you to set the paper width before feeding
the paper.
Select Follow Paper Source Settings to follow
the cut settings in Printer Settings > Paper
Source Settings > Roll Paper Setup > Cut
Settings.
Select Never Cut to cut paper manually.
Turn this off if the front edge of thin paper or softer
paper folds
Select the paper core size for the loaded roll paper
75
Advertisement
Table of Contents
