Using Roll Paper; Setting Up Automatic Media Tracking And Identification - Epson surecolor p5000 Quick Reference Manual

Using roll paper

You can use roll paper with a 2- or 3-inch core and a width of up to 17 inches (43 cm).

Setting up automatic media tracking and identification

Before you load roll paper in the printer, you can set up the automatic media tracking system. This prints
a barcode on the edge of the paper that indicates the media type, roll length, and the alert setting when you
press the button.
When the printer is turned on or roll paper is loaded in the printer, the barcode is scanned, the media type
is automatically set and displayed, and the amount of roll paper remaining is displayed on the LCD screen.
You will see an alert message when the roll is nearly used up.
Before you start, make sure to unload any roll media that is currently in the printer. Make sure the printer
is on.
Press the r
Menu button
1.
Press the d button to select
2.
Press the d button to select
3.
Press the r button to select
4.
Press the d button, select
5.
Press the l button to go back to
6.
Press the d button to select
7.
Select the length of the roll paper to be loaded in the printer, then press the
8.
Note: You can switch between meters and feet with the Units: Length setting in the Preferences menu.
Press the l button to go back to
9.
Press the d button to select
10.
Select the roll paper length at which you want to receive an alert message, then press the
11.
Press the button to exit the menu.
12.
.
, then press the r button.
Paper
Roll Paper Remaining
Remaining Paper Setup
, and press the
On OK
Remaining Paper Setup
, then press the r button.
Roll Paper Length
Remaining Paper Setup
, then press the r button.
Roll Length Alert
, then press the r button.
.
button.
.
.
Using roll paper
button.
OK
button.
OK
|
5