Connecting To A New Wi-Fi Router; Disabling Wi-Fi Features - Epson SureColor P5370 User Manual

4. Select Wired LAN Connection Method > Start Setup.
The Wi-Fi connection is disabled and a confirmation message appears. Select OK and then press
the home button to exit.
5. Connect one end of an Ethernet network cable to the product's LAN port.
6. Connect the other end to any available LAN port on your router or access point.
Parent topic:

Connecting to a New Wi-Fi Router

If you change the wireless router you have been using on your network, you need to update your
product's Wi-Fi connection to the new router.
1. Do one of the following:
• Windows: Uninstall your product software.
• Mac: Go to the next step.
2. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic:

Disabling Wi-Fi Features

You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and
password.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the
2. Select the
Note: Icon may look different depending on connection status.
3. Select Router > Change Settings > Others > Disable Wi-Fi.
Changing or Updating Network Connections
Changing or Updating Network Connections
home button, if necessary.
network icon.
44