Table of Contents
Advertisement
Setting
Paper Suction
Back Tension
Drying Time
Paper Size Check
Auto Cut
Skew Reduction
Roll Core Diameter
Paper Eject Roller
Options
Description
–4 to +4
Adjusts the printer's suction setting for the
selected source; choose lower values for
thinner papers
Standard
Select to adjust the paper feeding tension;
choose High or Extra High if paper wrinkles
High
during printing
Extra High
Drying Time per Pass
Set the amount of time the printer pauses to
allow drying after each pass or each printed
Drying Time per Page
page
On
Select On to detect the paper width when
paper is loaded
Off
Select Off if a paper setting error occurs when
paper is correctly loaded
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Follow Paper Source
Select Follow Paper Source Settings to
Settings
automatically cut roll paper after each page is
printed depending on the paper source
Never Cut
settings
Select Never Cut to cut paper manually
On
Select Off if the front edge of thin or softer
paper folds
Off
2inch
Set the paper core size for the loaded roll
paper
3inch
Auto
Presses down on paper as it is ejected
Use(Heavy Load)
Select a Use option if the print head strikes
Use(Light Load)
the paper. If you are printing on glossy paper,
select Do Not Use to avoid damaging the
Do Not Use
paper surface.
151
Advertisement
Table of Contents
