Table of Contents
Advertisement
Setting
Platen Gap
Paper Suction
Drying Time
Paper Size Check
Paper Eject Roller
Paper Feed Offset
Paper Feed
Offset(Bottom)
Restore Default Settings
Options
Description
Auto
Select the distance between the print head
and the paper; displayed only when using a
0.9
custom paper type.
1.2
1.5
2.1
2.6
–4 to +4
Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Drying Time per Pass
Set the amount of time the printer pauses to
allow drying after each pass or each printed
Drying Time per Page
page.
On
Select On to detect the paper width when
paper is loaded.
Off
Select Off if a paper setting error occurs when
paper is correctly loaded.
Auto
Select to control the paper ejection roller;
select Auto to use the roller automatically
Use (Heavy Load)
depending on the type of Epson paper.
Use (Light Load)
Select a Use option to always use the roller to
Do Not Use
eject paper.
Select Do Not Use when you are concerned
about damaging the print surface.
–0.70 to +0.70%
Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
–0.70 to +0.70%
Adjust this setting if banding or uneven colors
appear on the bottom edge (0.59 inches [15
mm]) of the paper.
—
Restores advanced media settings to their
default values; not available with custom
paper types.
146
Advertisement
Table of Contents
