Jaicustomcontrolalc - IAI GO-2400M-PGE-1 User Manual

GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)

JAICustomControlALC

Related Topic: ALC (Automatic Level Control) Function
Configure JAI ALC settings. These settings are also used for AGC (auto gain control).
ALC
Control
Item
ALC Reference 10 ~ 100
High
Left
Mid-High
Left
ALC Area
Selector
Mid-Low
Left
Low
Left
Off
ALC Area
Enable
On
Off
ALC Area
Enable All
On
ASC Exposure
100 ~ 7999727
Min.
ASC Exposure
101 ~ 7999728
Max.
AGC Min. 100 ~ 1599
AGC Max. 101 ~ 1600
AGC/ASC
1 (slow) ~ 8 (fast)
Control Speed
Setting Range
High High High
Mid-Left Mid-Right Right
Mid-High Mid-High Mid-High
Mid-Left Mid-Right Right
Mid-Low Mid-Low Mid-Low
Mid-Left Mid-Right Right
Low Low Low
Mid-Left Mid-Right Right
Default
50 Set the target level for ALC. (unit: %)
Low Right Select the area for which to configure ALC Area Enable.
Enable/disable the photometry area selected in ALC Area
Off
Selector.
On: Operate ALC with all areas designated as
photometry areas, regardless of the individual enabled/
disabled photometry area states configured in ALC Area
Selector.
On
Off: Operate ALC according to the individual
enabled/disabled photometry area states configured in
ALC Area Selector.
Set the minimum value for the Exposure Auto (ASC)
100
control range.
Set the maximum value for the Exposure Auto (ASC)
24087
control range.
Set the minimum value for the Gain Auto (ASC) control
100
range.
Set the maximum value for the Gain Auto (ASC) control
1600
range.
4 Set the reaction speed for AGC/ASC. (8 is the fastest.)
- 91 -
Settings List
Description