Jaicustomcontrolblemish; Jaicustomcontrolshading - IAI GO-2400M-PGE-1 User Manual

GO-2400MC-PGE-1 | GO-2401MC-PGE-1 | User Manual (Ver. 1.0)

JAICustomControlBlemish

Configure settings for JAI white blemish correction.
Blemish
Setting
Control
Range
Item
False
Blemish Enable
True
Blemish Detect -
Blemish Detect
0 ~ 100
Threshold
Blemish Detect
0 ~ 255
Position Index
Blemish
Detect - 1 ~1935
Position X
Blemish
Detect - 1 ~ 1215
Position Y
BlemishNum -

JAICustomControlShading

Related Topic: ShadingCorrection
Configure shading correction settings.
Note: Settings that can only be configured when image acquisition on the camera is stopped.
Shading
Control Item
Flat Shading
Shading Correction
Color Shading (Color
Mode
models only)
Off
User 1
Shading Mode
User 2
User 3
Perform Shading
Calibration
Shading Detect Result
Default
True Enable/disable blemish correction.
- Execute blemish detection.
10 Set the blemish detection threshold.
0 Select the index for the target blemish coordinates (Blemish Data Position X/Y).
Display the X coordinate (horizontal pixel position) of the target blemish selected in [Blemish
-1 Detect Position Index]. You can also manually enter the X coordinate of the blemish you
want to correct.
Display the Y coordinate (vertical pixel position) of the target blemish selected in [Blemish
-1 Detect Position Index]. You can also manually enter the Y coordinate of the blemish you
want to correct.
- Display the number of target blemishes.
Setting Range Default
Flat Shading Select the shading correction method.
Off
-
-
Description
Set the area to which to save shading correction data. When this is
set to Off, shading correction data is not saved.
- Execute shading correction.
- Display the shading correction results.
- 92 -
Settings List
Description