Table of Contents
Advertisement
5.
MAINTENANCE
Preventive Maintenance Calendar
®
To keep the Jerome
631-X operating at peak performance, follow the maintenance schedule
below as a guide. Since maintenance is more a function of application and amount of use rather
than time, your requirements may be different from the listed schedule. Call AMETEK
BROOKFIELD Customer Service at 800-528-7411, 602-470-1414, or e-mail
customerservice.jerome@ametek.com for additional guidance for your environment and
operation.
PART/COMPONENT
Charge batteries
Change 0.25-inch fritware
Change internal filters and
tubing
1
Replace zero air filter
Factory calibration
Calibration check
Replace batteries
NOTE: Install the zero-air filter into the instrument's intake during storage.
1
Zero air filters, LFS and LFD scrubber filters contain Resisorb
Customer Service at 800-528-7411, 602-470-1414, or e-mail
Safety Data Sheet (SDS). Dispose of all filters properly.
Customer Service 800-528-7411 or 602-470-1414
MAINTENANCE CYCLE
At least once per month, after 1 month's storage,
or when LO BAT appears
Weekly or as needed
After 6 months of use or as needed
Annually
Annually
Monthly or as needed
Annually or as needed.
The battery pack contains NiCad batteries.
Dispose of properly.
®
customerservice.jerome@ametek.com
®
or AddSorb
VA13. Call AMETEK BROOKFIELD
REFER TO
PAGE
Page 17
Page 19
Page 20
Page 23
Appendix
A, Page 36
Page 21
for a copy of the
Page 18 of 52
700-0037 Rev 1.0
Advertisement
Table of Contents
