Table of Contents
Advertisement
GE M
S
EDICAL
YSTEMS
D
5123449-100, R
IRECTION
_____________________________________________________________________________________________
4.2.2.
Room Height Requirements
For a table with no longitudinal drive, the minimum room height is 240 cm (95"). For a table with longitudinal
drive, the minimum room height is 260 cm (103"). In both cases, the recommended room height is 300 cm (118").
By default all tables have the longitudinal drive. In case of longitudinal drive forbidden, the height can be reduced to
240 cm.
However, for a system with OTS and wallstand, full range of wallstand use is achieved with a ceiling height of 290
cm. A higher height will limit the lower end of the useful travel range of the wallstand.
For all OTS dimensions and travels make reference to par. 5.2.10, page 50.
Minimum
ceiling
Parameter
height
value
[cm]
From 0
???
to 239
From 240
240
to 249
From 250
250
to 259
From 260
260
to 269
From 270
270
to 279
From 280
280
to 289
From 290
290
to 299
From 300
300
to ∞
2
FD = Focal Distance
3
SID = Source to Image Distance
12
EVISION
Precision RXi
Elevable positioner
-90 / +90
WARNING!
The positioner movement is protected by
the hardware safety photocell only!
Table movements limited by software.
Table in horizontal position: the FD
3
limited SID
(it never reaches 150 cm).
Table in vertical position: the tabletop has
no longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD has a
limited SID (it never reaches 150 cm).
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD could
have a limited SID (no maximum SID and
maximum table elevation in the same
moment).
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD could
have a limited SID (no maximum SID and
maximum table elevation in the same
moment).
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
its maximum longitudinal drive.
Table without limited movements.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
its maximum longitudinal drive.
June 2009
P
RX
S
RECISION
I
YSTEM
Precision RXi
NON Elevable positione
WARNING!
The Positioner movement is protected by
the hardware safety photocell only!
Table movements limited by software.
2
has a
Table in horizontal position: the FD has a
SID limited to 115 cm.
Table in vertical position: the tabletop has
no longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD has a
SID limited to 135 cm.
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
limited longitudinal drive.
Table movements limited by software.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
its maximum longitudinal drive.
Table without limited movements.
Table in horizontal position: the FD can
reach the maximum SID;
Table in vertical position: the tabletop has
its maximum longitudinal drive.
P
-I
RE
NSTALLATION
-30 / +90
Page 21 / 111
Advertisement
Table of Contents
