Advertisement
Pinout
PIN NUMBER
PIN NAME
VCC
1
2
GND (-)
3
DIN 1
4
AIN 1
5
DOUT 1
PC Connection (Windows)
1.
Power-up FMB900 with DC voltage 6-30 V power supply using power cable. LED's should
start blinking, see
Connect device to computer using Micro-USB cable or Bluetooth connection:
2.
Using Micro-USB cable
You will need to install USB drivers, see
(Windows)"
Using Bluetooth
FMB900 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then
select Add Bluetooth or other device > Bluetooth. Choose your device named –
"FMB900_last_7_imei_digits", without LE in the end. Enter default password
5555, press Connect and then select Done.
3.
You are now ready to use the device on your computer.
How to install USB drivers (Windows)
1.
Please download COM port drivers from here.
2.
Extract and run TeltonikaCOMDriver.exe.
3.
Click Next in driver installation window.
4.
In the following window click Install button.
5.
Setup will continue installing the driver and eventually the confirmation window will appear.
Click Finish to complete the setup.
Configuration (Windows)
At first FMB900 device will have default factory settings set. These settings should be changed
according to the user's needs.
Main configuration can be performed via
Configurator version from here. Configurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements
Operatin
MS .NET
g system
Framework version
(6-30)V DC (+)
"FMB900 LED
Version Link
DESCRIPTION
Power supply (6-30) V DC (+).
Ground.
Digital input, channel 1. DEDICATED FOR IGNITION INPUT
Analog input, channel 1. Input range: 0-30 V DC.
Digital output. Open collector output. Max. 3,3 A DC.
status".
"How to install USB drivers
Teltonika Configurator
software. Get the latest FMB900
Advertisement
