Advertisement
Quickly set up your device by sending this SMS command to it:
"
setparam
2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
GPRS settings:
2001 – APN
2002 – APN username (if there are no APN username, empty field should be left)
2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
2004 – Domain
2005 – Port
2006 – Data sending protocol (0 – TCP, 1 – UDP)
Note: Before SMS text, two space symbols should be inserted.
Default configuration settings
Movement and ignition detection:
Vehicle movement will be detected
by accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes
Vehicle drives 100 meters
Device makes a record On Stop if:
1 hour passes while vehicle is
stationary and ignition is off
Records sending to server:
If device has made a record it is
sent to the server every 120
seconds
After successful SMS configuration, FMB900 device will synchronize time and update records to
configured server. Time intervals and default I/O elements can be changed by using
Configurator
or
SMS
Quick start guide
parameters.
Ignition will be detected by
vehicle power voltage
between 13,2 – 30 V
Vehicle turns 10° degrees
Speed difference between
last coordinate and current
position is greater than 10
km/h
Teltonika
Advertisement
