Model Assembly (MA) Test Mode Test
Model Assembly Test Mode is an embedded series of operational tests of the unit's user
•
interface and functional features.
Motorola iDEN recommends MA Test Mode be performed after any servicing of the unit.
•
An Audio Test Cable is required to complete test mode correctly. See the Required Tools
•
section or contact Motorola's Aftermarket Accessories Division.
MA Test mode is achieved by starting from a power-down condition:
1. Press and hold three keys in a row such as 1-2-3, 4-5-6, 7-8-9, ÷-O-#. Simultaneously, press the
Power key.
2. Release all keys once the opening screen appears in the main display.
3. Follow instructions as they appear pressing the indicated keys.
4. No instruction? Press any key or Scroll right.
5. No reaction? Power down the unit, check battery condition, and start MA Test again.
Screen displays are depicted as follows:
68P80400P84-O
FIELD LEVEL TEST MODES AND PROCEDURES: Model Assembly (MA) Test Mode Test
8-13