Battery Connections Test; Testing The Gps Receiver - Motorola iDEN i265 Field Service Manual

1. Power up the unit.
e
2. Press
3. Press each of the alphanumeric keys to see if the unit responds. If the unit does not respond to a
pressed key, remove the battery to cycle power on.
If the problem persists after several tries, replace the unit.
5.5.5

Battery Connections Test

Use this test to check the battery connections in the unit.
The battery connections test time is approximately 5 minutes:
1. Remove the battery door and battery from the unit.
2. Inspect the battery for physical damage.
If damage is evident, replace the battery.
3. Insert and remove the battery several times to check the battery connections and back plate of
the unit.
If either components are damaged, replace the unit.
4. Check the battery contacts for foreign material. Use a gold contact cleaning pen (see Appendix
A: Ordering Replacement Parts & Kits for part number) to clean the contact area on the battery.
CAUTION: Do not use a pencil eraser or similar material to clean the contacts.
F
If you do, damage can occur to the contacts.
5. Check the battery cover to ensure it fits and attaches properly to the back of the unit. Replace, if
necessary.
6. Use a pencil or similar object to depress the battery contacts. They should spring back to their
original position.
If the battery contacts do not spring back, they are damaged. Replace the unit.
5.5.6

Testing the GPS Receiver

The GPS receiver does not require alignment. The functionality of the receiver can be checked using
the autonomous mode feature.
Equipment Required: a known good i265 unit or a commercial GPS receiver.
To test this function:
1. Move the unit to an open sky area, preferably outside—away from tall buildings and foliage.
2. With the unit turned on, press Menu.
68P80400P84-O
BASIC LEVEL CHECKS AND SELF TESTS: Mechanical and Electrical Checks
to clear display inputs.
5-5