Using The Optional Vibrate Function - Motorola iDEN i265 Field Service Manual

Digital multi-service, data-capable portable
Table of Contents

Advertisement

DISPLAYS, MESSAGES, AND ALERTS: Using the Optional Vibrate Function
Table 3-4. i265 Alert Tones (Continued)
Tone
Low
Talk Prohibit
Ear
TOT Warning
Ear
Valid Key Press
Ear
Voice Mail
Spkr
Received in Idle
Voice Mail
Ear
Received in
Interconnect
3.5

Using the Optional Vibrate Function

The vibrate function (VibraCall) notifies the user of incoming phone or dispatch calls, Private calls
(DC), group calls (GC), messages, notifications, and call alerts.
If the unit is set for Vibrate in any mode, it will vibrate for 1/2 sec during the power-up sequence.
To set unit to vibrate for all calls:
1. Using the keypad, press
2. Scroll to Ring Tones, and then press Select.
3. Scroll to Vibe All, and then press Select.
4. Scroll left or right to set Vibe All to On, or press A under Change, scroll up or down to
highlight On or Off, press A under Select to Change, and then press Select.
5. After you select a Vibrate mode, the unit vibrates for 1/2 sec while exiting the menu.
The following table describes the cadence for each vibrator mode:
Table 3-5. Vibrator Settings
Mode
Vibe All or Selectable Vibrate
Ring Tones
Off
To set unit to vibrate for Private (DC) and group calls (GC) only:
1. From the main menu, select Settings > DC/GC Options > Alert Type.
2. If Alert Type does not appear, from the main menu select Ring Tones. Make sure Vibe All or
Silent All is set to Off. Repeat step 1.
3. Scroll left or right to select Vibe or Ring, or press A under Change.
4. Scroll to Vibe.
5. Press A under Select.
3-6
High
Freq
Cadence
Spkr
900Hz
Continuous
Spkr
900Hz
1x80ms on
Ear
1800Hz
1x80ms on
Spkr
2400/
8x(64ms on 2400Hz + 64ms on
2743Hz
2743Hz) every 30 seconds
Ear
2400/
8x(64ms on 2400Hz + 64ms on
2743Hz
2743Hz) every 30 seconds
m
.
Cadence
2x(500ms on, 500ms off) + 500ms on + 2.5 sec. off
Three Vibrate Only cadences, followed by an audible ring tone until
answered or party hangs up
Turns off the vibrator function
When Tone Occurs
PTT transmission not allowed
Transmission rights expiring
Valid key pressed or unit powered
up
Voice mail received while unit is
idle
Voice mail received while unit is
in interconnect mode
68P80400P84-O

Advertisement

Table of Contents
loading

Table of Contents