Codeplug Repair Procedure - Motorola iDEN i265 Field Service Manual

Refer to the Radio Service Software Read-Me's for more information on setting up your test
computer as an RSS workstation.
NOTE: For faster codeplug reading, enable the QuickComm feature in the RSS configuration
setup.
6.5.1

Codeplug Repair Procedure

If the codeplug is corrupted, the unit displays a SELF CHECK ERROR 0800 message. The
procedure for repairing a corrupted codeplug is described in the RSS online Help System.
Equipment Required: computer workstation with correct version of RSS for the unit, RS232 or
To access the codeplug Help topic in Windows:
1. Set up your test equipment configuration (see Figure 6-1.).
2. Start the RSS program.
3. Click on the Help choice on the menu bar, and then select Contents. The RSS online Help is
displayed.
4. Click on the Troubleshooting link, and follow the detailed directions.
68P80400P84-O
BASIC LEVEL TEST MODES AND PROCEDURES: Connecting the Unit to the RSS Workstation
Unit Under Test
Data Cable RS232
RS232
(NKN6544) or
or
USB Data Cable
USB Data Cable
(NNTN4007)
Figure 6-1. Data Cable Programming Setup
USB data cable, and reference unit (must be the same model as the
problem unit)
Computer
Workstation
(RSS)
Serial Port/
USB Port
6-9