Manual Test Mode; Live Sim Card; Personality Transfer - Motorola V2288 Service Manual

V2282

5.1 Manual Test Mode

The GSM Motorola V2282 is equipped with a manual test mode capability. This capability allows
service personnel to take control of the unit, and by entering certain keypad commands, make the unit
performs desired functions.
To enter the manual test command mode, a GSM / DCS mini test sim (Part No 8102430Z04) must be
used.
The test sim is inserted into the SIM slot in the side of the phone (See figure 6.1), the battery should
then be inserted and the unit powered on. The # button should then be pressed for approximately 3
second until 'test' appears on the display, and the correct commands must then be followed.
SIM CARD SLOT

5.2 Live Sim Card

A SIM (Subscriber Identity module) card will be required to access the existing local GSM / DCS
cellular network, or remote networks when travelling. (If the roaming agreement has been made with
the provider.)
The SIM card contains all the data necessary to access GSM services, and also:
•
The ability to store user information such as phone numbers etc...
•
All information required by the network provider to provide use to the network
5.3

Personality Transfer

No personality transfer available on this product.
23 of 50
Figure 6.1 SIM Card insertion
GSM Global Service Support