Control Elements And Connections; General; Safety; Cold Wire Feeder Front - Fronius KD 4000 D-11 Operating Instructions Manual

Control elements and connections

General

Owing to software updates, you may find that your machine has certain functions
that are not described in these Operating Instructions, or vice-versa. Certain il-
lustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.

Safety

Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Cold wire feeder
front
Front
(2)
(3)
(4)
(5)
(6)
18
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Fully read and understand this document.
Read and understand all the user documentation for this device and all sys-
tem components, especially the safety rules.
(3)
(2)
(1)
Wirefeeding connection
LocalNet connection
standardised connection socket for system extensions (e.g. remote con-
trol, JobMaster welding torch, etc.)
Torch control connection
for connecting the torch control plug
Water flow connection (blue)
Coolant return-flow connection socket (red)
(1)
(4)
(6) (5)
Welding torch / (-) current
socket connection
in conjunction with a Ma-
gicWave power source for con-
necting:
- a TIG welding torch
- the electrode cable for
manual metal arc welding
in conjunction with a TransTig
power source for connecting:
- a TIG welding torch
- the electrode cable or
grounding cable during
MMA welding (depending
on the type of electrode
used)