For PPPoE, enter PPPoE account ID and password so the GAC2500 can get IP address from the PPPoE server.
WI-FI
Turning Wi-Fi On or Off
Wi-Fi is supported and built-in on the GAC2500. On the LCD display, go to SettingsAdvanced settingsWireless & network
Wi-Fi to turn on and configure Wi-Fi.
Search and Add Wi-Fi
Once Wi-Fi is turned on, GAC2500 will automatically start the scanning within the range. A list of Wi-Fi networks will be
displayed as scanning result. Tap on the SSID and enter the correct password information to connect to the selected Wi-Fi
network.
Follow the steps below for static IP usage in Wi-Fi environment:
1. Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength, security, password
and option "Show advanced options".
2. Select "Show advanced options". The dialog will show additional option "IP settings".
3. In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Default Gateway for the GAC2500 to correctly connect
to the network.
Bluetooth
Users could use the Bluetooth to send or receive files to cellphone, or use Bluetooth speaker and etc.
Turning Bluetooth On or Off
There are two ways to enable Bluetooth:
On the LCD display device, go to SettingsNetworkBluetooth.
Click
to enable the Bluetooth in the drop-down status bar.
Figure 22: GAC2500 Add Wi-Fi Screen